Productcode: SPC253 | EAN/UPC: 5903018661179
ATX/Micro-ATX/MITX, 2.5"/3.5", 2 x USB 3.2 Gen 1, Black
SilentiumPC Signum SG1Q EVO TG ARGB, PC, Zwart, ATX, micro ATX, Case fans, 16,1 cm, 32,5 cm
Colorful ARGB light flow
Signum SG1Q Evo TG ARGB comes with a characteristic ARGB LED stripe spreading the colorful light across the entire height of the front panel. The user can switch between available modes and colors in many different ways – exactly as in many other SilentiumPC chassis. By default, the front luminous pattern is synchronized with the Stella HP ARGB CF 120 mm rear fan, and you can control LEDs of both with the button located on the front of the case (lighting panel included).
The SilentiumPC Signum SG1Q Evo TG ARGB chassis is equipped with an addressable LED lighting system in the form of a characteristic ARGB stripe in the front panel and Stella HP ARGB CF 120 mm fan. The effects and colors can be controlled with the button on the front control panel thanks to the included lighting panel. The ARGB system can also be synchronized with a compatible motherboard equipped with a 3-pin ARGB connector.
The spacious structure of the Signum SG1Q Evo TG ARGB provides enough space for most components popular in this segment: the tower air cooler can be 161 mm tall, and the graphics card can be 325 mm long. The cooling system consists of two high pressure fans: Sigma HP 120 mm and Stella HP ARGB CF 120 mm. A set of standard filters: two at the front, at the top and under the power supply, prevents the dust from entering the chassis.
Tempered glass panel The large side panel made of tempered glass together with the ARGB lighting system allows the presentation of tastefully selected components installed inside the SilentiumPC Signum SG1Q Evo TG ARGB chassis.
Addressable RGB LED lighting system Signum SG1Q Evo TG ARGB is equipped with an addressable LED lighting system in the form of ARGB front stripe and Stella HP ARGB CF fan with a controller. It is fully compatible with other SilentiumPC ARGB (5V) devices, such as Navis Evo ARGB, ARGB air coolers, Aurora Stripes ARGB and Stella HP / Corona HP ARGB fans.
High pressure fans Two high-pressure fans are responsible for cooling the components inside the Signum SG1Q Evo TG ARGB case: Stella HP ARGB CF 120 mm and Sigma HP 120 mm. They ensure high airflow, tailored to the segment of this class of computers.
Full set of dust filters A set of four standard dust filters: two at the front, one at the top and one under the PSU, helps to keep the interior of Signum SG1Q Evo TG ARGB and installed components clean. The users can install up to eight 120 mm fans inside the chassis.
AIO LC compatibility The Signum SG1Q Evo TG ARGB chassis fits integrated liquid cooling systems (AIO). Their radiators can be: 120/240/360 (at the front), 120/240 (suspended under the top; maximum RAM module height: 32 mm) or 120 mm long (at the rear).
I/O panel: 2× USB 3.2 Gen1 All the important ports and buttons at your fingertips – 2 × USB 3.2 Gen1, audio ports and POWER and RESET/LED buttons.
SSD mounts behind the motherboard Two 2,5" devices (e.g. SSD drives) can be mounted in bays designed specifically for this purpose and located behind the motherboard tray. In order to access it, the user has to unscrew the side panel’s bolts and remove it. Such mounted SSDs do not take up space intended for the 3,5" hard drives.
Built-in ARGB lighting controller The effects and colors can be controlled with the button at the front of the case thanks to the included lighting panel. It allows you to choose one of the many effects and colors of light available.
Cable arrangement system The SilentiumPC Signum SG1Q Evo TG ARGB case utilizes advanced cable arrangement system consisting of numerous cutouts, and a plenty of space between the back of the motherboard tray and the inner wall of side panel allows for very precise arrangement of all the cables without obstructing the airflow.