E-ATX/ATX/Micro-ATX/MITX, 2.5"/3.5", 2 x USB 3.1 Gen 1, 470 x 221 x 443mm, Black
SilentiumPC Regnum RG6V TG, Midi Tower, PC, Zwart, ATX,EATX,Micro ATX, Gamen, Case fans
Efficient cooling system
The Regnum RG6V TG chassis is equipped with numerous and extensive vents as well as with four high pressure Sigma HP 120 mm fans. Three of them are mounted at front and one at the rear. This ensures a high airflow and generates slight overpressure, which helps to keep the inside clean.
SilentiumPC Regnum RG6V TG is a chassis exceptionally focused on high air flow, and thus on effective cooling of the components installed inside the PC. It is equipped with four Sigma HP 120 mm high pressure fans – three at the front and one at the back. Regnum RG6V TG is based on the newly developed Natissis structure, whose one of the many advantages is the exceptionally wide compatibility with integrated liquid cooling systems (AIO). An illuminated version of this case is also available – Regnum RG6V Evo TG ARGB – equipped with four Stella HP ARGB CF fans and built-in controller for addressable LEDs.
Tempered glass panel
The large side panel made of tempered glass allows the presentation of tastefully selected and assembled components installed inside the SilentiumPC Regnum RG6V TG chassis.
Full set of dust filters
In SilentiumPC Regnum RG6V TG, there are three intake dust filters included (at front, on top and under PSU) to help fight off the dust and keep its interior clean. The user can equip the case with a total of eight 120 mm fans.
4× Sigma HP 120 mm
The Regnum RG6V TG case is equipped with four Sigma HP 120 mm high pressure fans for decent ventilation of the interior. The included splitter allows you to connect them to one socket on your motherboard and control their rotational speed, e.g. depending on the processor temperature or manually by the user.
I/O panel: 2× USB 3.2 Gen1
All the important ports and buttons at your fingertips – 2 × USB 3.2 Gen1, audio ports and POWER and RESET buttons.
The SilentiumPC Regnum RG6V TG chassis utilizes a 391 mm long Natissis structure designed in Poland. The creators’ goal was to maximize space utilization within the standard size MIDI Tower constructions for ATX and E-ATX formats. The interior will fit graphics cards up to 360 mm long, and the CPU air cooling kits can have a maximum height of 162 mm. The most distinctive element of this segment is undoubtedly the possibility of installing radiators for integrated liquid cooling systems (AIO) not only at the front (120/140/240/280/360 mm), but also at the top of the case: 120/140/240/280 mm! Alternatively, the user can install up to 8 fans inside the chassis.
Broad AIO LC compatibility
The Regnum RG6V TG chassis fits integrated liquid cooling systems (AIO). Their radiators can be: 120/140/240/280/360 (at the front), 120/140/240/280 (suspended under the top) or 120 mm (at the rear) long.
Cable arrangement system
At the rear of the Natissis structure, on which the Regnum RG6V TG is based, there is a space behind the motherboard tray max. 29 mm deep with numerous – 24 pieces – cable tie hooks for better and more aesthetic cable management. It also has its own vents.
Centralpoint is de grootste IT-reseller van de Benelux en adviseert merkonafhankelijk heel werkend Nederland en België over concrete IT-oplossingen. Of het nu gaat om een overheidsinstelling of een zelfstandige. Wij hebben voor elke organisatie een passende IT- oplossing. Centralpoint ondersteunt u onder andere met consultancy, e-commerce-oplossingen en dienstverlening rondom beheer, beveiliging en logistiek van IT-hardware. Uw centrale aanspreekpunt staat altijd voor u klaar.