€ 0

SilentiumPC Signum SG7V EVO TG ARGB Behuizing

Productcode: SPC250  |  EAN/UPC: 5903018661100

88,- excl. btw
106,48 incl. btw
Op voorraad (7)
1 werkdag
Gratis Verzending!

Schrijf een review en help anderen met hun keuze door uw ervaring te delen.



SilentiumPC Signum SG7V EVO TG ARGB Behuizing kenmerken

ATX/Micro-ATX/MITX, 2.5"/3.5", 2 x USB 3.2 Gen 1, Black

SilentiumPC Signum SG7V EVO TG ARGB, PC, Zwart, ATX,Micro ATX, 17,8 cm, 42 cm, 22 cm

Efficient cooling system The Signum SG7V Evo TG ARGB chassis is equipped with numerous and extensive vents as well as outstandingly airy mesh front panel. Thanks to this, the four high pressure fans – Stella HP ARGB CF 120 mm – provide great amounts of air flow, which translates into very low temperatures of components installed inside.

The Signum SG7V Evo TG ARGB case is a combination of spaciousness and functionality, as well as great ventilation (and thus, very efficient cooling of PC components) rare in this segment. This is ensured by four high-pressure fans (Stella HP ARGB CF) as well as an airy mesh front. The distinguishing feature of Signum SG7V chassis is the possibility of installing radiatiors with a maximum size of 240/280/360 at the front and at the top – also simultaneously! An additional, eye-catching touch is the addressable LED lighting system – four Stella HP ARGB CF fans – with an additional ARGB Nano-Reset controller included.

‘Open’ mesh front panel An ‘open’ mesh front panel provides full access to cold air from the outside. This allows to generate an unobstructed stream of air cooling the CPU and graphics card. The user can install up to seven 120/140 mm fans!

Addressable RGB LED lighting system Signum SG7V Evo TG ARGB is equipped with an addressable LED lighting system in the form of four Stella HP ARGB CF 120 mm fans and Nano-Reset ARGB controller. It is fully compatible with other SilentiumPC ARGB (5V) devices, such as Navis Evo ARGB, ARGB air coolers, Aurora Stripes ARGB and Stella HP / Corona HP ARGB fans.

Tempered glass panel The large side panel made of tempered glass together with the ARGB lighting system allows the presentation of tastefully selected and assembled components installed inside the SilentiumPC Signum SG7V Evo TG ARGB chassis.

I/O panel: 2× USB 3.2 Gen1 All the important ports and buttons at your fingertips – 2 × USB 3.2 Gen1, audio ports and POWER and RESET buttons.

Nano-Reset controller with splitter The chassis is equipped with Nano-Reset ARGB controller and a splitter, which allows to connect up to 5 fans and 5 ARGB devices. They allow you to cycle through different effects and colors using a designated button located at the front of the case, even if your rig is not equipped with an ARGB compatible motherboard.

Broad AIO LC compatibility The Signum SG7V Evo TG ARGB chassis fits integrated liquid cooling systems (AIO). Their radiators can be: 120/140/240/280/360 (at the front), 120/140/240/280/360 (suspended under the top) or 120/140 mm (at the rear) long. All three can be installed at the same time, without colliding each other!

Full set of dust filters In SilentiumPC Signum SG7V Evo TG ARGB, there are five intake dust filters included (three at the front, one on top and one under the PSU) to help fight off the dust and keep its interior clean. The users can install up to seven 120/140 mm fans inside the chassis.

Cable arrangement system The enclosure is equipped with the cable arrangement system which consists of numerous cable entries, and a large amount of space behind the motherboard tray allows users to arrange the cables very precisely without interrupting the airflow that takes place inside of the case.