Productcode: SPC256 | EAN/UPC: 5903018661216
E-ATX/ATX/Micro-ATX/MITX, 2.5"/3.5", 2 x USB 3.1 Gen 1, 470 x 221 x 443mm, Black
SilentiumPC Armis AR6Q EVO TG ARGB, PC, Zwart, ATX,EATX,Micro ATX, Gamen, Case fans, 16,2 cm
ARGB lighting on the front
Armis AR6Q Evo TG ARGB is distinguished by a stylish ARGB pattern embedded in its front panel and running through its diagonal – from the top right to the bottom left. Users can adjust it by cycling through its available lighting modes and colors.
The SilentiumPC Armis AR6Q Evo TG ARGB chassis is equipped with an addressable LED lighting system in the form of a characteristic ARGB strip embedded in front panel and a Stella HP ARGB CF 120 mm fan. Effects and colors control by means of a dedicated button located at the front of the case is possible thanks to the ARGB Nano-Reset controller included in the set.
Addressable RGB LED lighting system Addressable lighting (ARGB) provides the ability to manage each LED regardless of the others. This gives you unbelievably many possibilities of matching effects and colors to your preferences! Controlling them, using a separate button on the front of the case, is possible thanks to the included Nano-Reset ARGB controller. The lighting system can also be synchronized with a compatible motherboard equipped with a 3-pin ARGB connector.
Tempered glass panel The large side panel made of tempered glass together with the ARGB lighting system allows the presentation of tastefully selected and assembled components installed inside the SilentiumPC Armis AR6Q Evo TG ARGB chassis.
I/O Panel: 2× USB 3.2 Gen1 All the important ports and buttons at your fingertips – 2 × USB 3.2 Gen1, audio ports, POWER button, and finally, LED switch for addressable lighting control.
High airflow design The Natissis structure, on which Armis AR6Q Evo TG ARGB is based, is equipped with a large bottom ventilation opening protected by a magnetic dust filter, which allows the most natural, down → up air flow. The lower chamber cover (for the power supply and disks) allows the installation of fans or an additional AIO cooler, if the user had such a need.
2 fans, including 1× Stella HP ARGB CF Two high pressure fans: illuminated Stella HP ARGB CF 120 mm and Sigma HP 120 mm included inside Armis AR6Q Evo TG ARGB provide large amounts of airflow needed for proper ventilation of the components.
Broad AIO LC compatibility The Armis AR6Q Evo TG ARGB chassis fits integrated liquid cooling systems (AIO). Their radiators can be: 120/140/240/280/360 (at the front), 120/140/240/280 (suspended under the top) or 120 mm (at the rear) long.
Nano-Reset controller with splitter The chassis is equipped with a splitter, which allows to connect up to 5 fans to one FAN output on the motherboard and – in this way - control their rotational speed depending on the CPU temperature or manually by the user. On its other side are ARGB connectors, which also allow you to connect 5 ARGB devices to one socket in the motherboard or, for example, Nano-Reset controller.
Full set of dust filters In SilentiumPC Armis AR6Q Evo TG ARGB, there are four intake dust filters included (two at front, one on top and another one under the PSU) to help fight off the dust and keep its interior clean. The users can install up to 8 fans inside the chassis.
Cable arrangement system At the rear of the Natissis structure, on which the Armis AR6Q Evo TG ARGB is based, there is a space behind the motherboard tray max. 29 mm deep with numerous – 24 pieces – cable tie hooks for better and more aesthetic cable management. It also has its own vents.