Productcode: PT-IPAV-E2-TX | EAN/UPC: 4260134128179
Verwachte voorraad datum:
Full HD, 60Hz, 120m, 5V, 1A, 3W, 119x79.5x28mm, 270g, Black
PureTools PT-IPAV-E2-TX, 1920 x 1080 Pixels, AV-zender, 120 m, Bedraad, Zwart
PureTools PT-IPAV-E2-TX - HDMI to IP Extender Transmitter
PureTools HDMI to IP Extender Transmitter - Convert AV signals to IP-based Ethernet signals. This is the transmitter unit as a supplement to the PT-IPAV-E2-RX receiver.
AV over IP - Use proven Ethernet 100Mbps network technology to transmit AV signals!
The PureTools PT-IPAV-E2 offers four display modes: one-to-one, one-to-many, many-to-one and many-to-many, offering a choice of 16 pre-programmed channels. Additional channels can be added as required. An almost unlimited number of transmitters or receivers can be integrated into each channel. With the PT-IPAV-E2, AV resolutions up to FullHD / 1080p@60Hz can be transmitted over a distance of 120m via Cat.5e or Cat.6 with an average of 15Mbps - The codec used is H.264. The receiver has an integrated RS232 interface, which can be bi-directionally controlled from both sides. There is also a push button switch for channel selection, including a digital display on the front of the unit - for easy access in difficult installations. The built-in IR forwarding function allows control of a connected device from a remote location - Optimal when the IR signal is to be sent back to the source device against the AV signal direction. To power the PT-IPAV-E2 Extender Set, seperate power supplies or Power-over-Ethernet (PoE) can be used.